When we wear a bra we usually just focus on the style and the fabric, and the upper body's effect and comfort, but in fact, a good underwear, in addition to these is not enough, how can we buy a wishful thinking Underwear it?
Here I talk about personal experience, how to distinguish the quality of the appearance of underwear:
First: look at the shoulder strap. A good underwear, elastic force of its shoulder strap must be strong, when we stretch it hard, there will be no curling phenomenon or wavy phenomenon when the straps rebound. Furthermore, the shoulder strap to have the appropriate thickness, the thickness of the case will not slip, too soft shoulder strap will stretch enough.
Second: the 9-button buckle and 8-button buckle is stainless steel material. If not, it is easy to deformation situation, once the 9-character buckle or 8-character buckle deformation, a good multi-piece underwear basically scrapped. And these small accessories sub-sub-plastic buckle with stainless steel buckle, memory alloy buckle and stainless steel buckle, as well as pure plastic buckle. Plastic buckle in the quality and life expectancy is the latest one, stainless steel and easily lead to skin allergies. Sisters must consider this point in the purchase, do not blindly.
Third: the back of the bra hook is solid, and can not be loose phenomenon. If the phenomenon of loosening, one hundred percent back is a quality problem. We wear and take off every day, a few times or a dozen times after the emergence of a bit or broken hook phenomenon, so you appear like a torment and uncomfortable is not the main, the key is who we are on a daily basis Small bag with the same physiological items put underwear to prevent the need for it?
Fourth: look at the shape of the cup. An underwear mold on both sides of the cup is absolutely symmetrical, we see the quality of the model cup, the bra on either side of the mold cup in your hand so that together, and then completely open within ten seconds to make it The surface of the wrinkles basically returned to a flat state. 90% of such die cups are of good quality.
Fifth: look at the needle, a underwear in addition to the back than a large piece of cloth is pure machine work without the line outside, most of which are underwear made of artificial Seiko, a underwear at least forty or more Procedures, each process has a fixed line, and good underwear, the trend of the line is also very rules, there will be no size of the needle and the case of disconnection, such as jumpers and the size of the needle at least To show that this is the brand of underwear or underwear is under the premise of not paying attention to the quality of the production line.
Sixth: see accessories. Good underwear accessories pay attention to the appearance and the corresponding quality.
Seventh: Look at the lace. We often say that lace includes embroidery lace and elastic lace two kinds of embroidery lace generally not much stretch, it can not do the entire cup surface decoration, and embroidery generally more expensive than elastic lace. Both
The biggest difference is the use of grade and aesthetics. Street shops and stalls that are mostly cheap lace underwear lace is the mainstream. Lace both embroidery and stretch have an unavoidable problem, that is, the problem of thread, especially lace lace embroidery, the national standard requires that the stitch length per stitch can not exceed 2-3 silk, that is, three millimeters . And the number of stitches can not be too short. If these problems, most of them proved to be less emphasis on the brand factory production, or small semi-mechanized equipment.
Eighth: look at the steel ring. The steel ring we are referring to under the two mold cup underwear ring ring stereotypes; where the steel ring is directly related to the shaping effect of underwear, a good steel ring under normal circumstances will not be forced to squeeze when the deformation , And some unscrupulous manufacturers often in order to save costs directly with stainless steel ring or apron instead. This result is self-evident.
Ninth: see cloth standard (marks). Any piece of underwear cloth label is only the component identification and brand identity before the purchase, we should be cut with scissors after the purchase, but most people do not do such a job until the wear bad. Just as a suit's armband needs to be removed, this is common sense. However, we did not ignore some of the hidden information at the time of purchase because we wanted to cut this label. First, it identifies the material and composition of the underwear is the only one can reflect the small pendant; Second, it reflects a brand's promotion of its own brand emphasis, the function of large underwear brand cloth standard Work is very important. And those who are too casual underwear manufacturers, most did not pay attention to this point, the third, the cloth standard can reflect the brand if there is a redirection or OEM issues, if OEM, at the bottom of the cloth must be useful scissors Cut the end of the standard, or free pinhole. Here's a special statement, many trading companies is to change the standard to change the brand.
Tenth: look tag. Any manufacturer of underwear, contact information, implementation standards, trademarks, washing methods, factory address, web site, etc. must be reflected on the tag, if not more than one of the above are not normal. We should be careful when buying one hundred.
Eleventh: look underwear flat effect. A good underwear, palm stretched into the flat surface should be flat, such as the emergence of uneven conditions, for three reasons: â‘ steel ring deformation, â‘¡ there was the case of artificial extrusion, â‘¢ quality problems Or design problems (not including the design of special design, such as the design of the wavy lower arm circumference or other artistic style).
Polyester Cotton Plaid Fabric,Polyester Cotton Fabric,Check Fabric,Shirt Fabric 100% Cotton
Shaoxing City Yongteng Textile Co., Ltd. , https://www.yongtengtex.com